DRUCK
TEMPERATUR
&
Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
• www.druck-temperatur.de
GERMANY
DT
www.
-Cal.net
LR
MANUAL
LR
LR
-
-
Cal
Cal
200 +
200-T
LPC
LPC
56
5. Transport, packaging and storage
Check the
for any damage that may have been
calibrator
/
200
200-T
LPC
LPC
LR
LR
-
-
Cal
Cal
caused by transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging unl just before mounng.
Keep the packaging as it will provide opmum protecon during transport (e.g. change in
installaon site, sending for repair).
5.3 Storage
Permissible condions at the place of storage:
•
Storage temperature: -20 ... +60 °C
•
Humidity: 0 ... 85 % relave humidity (non-condensing; at 50 °C)
Avoid exposure to the following factors:
•
Direct sunlight or proximity to hot objects
•
Mechanical vibraon, mechanical shock (pu ng it down hard)
•
Soot, vapour, dust and corrosive gases
•
Potenally explosive environments, lammable atmospheres
Store the
in its original packaging in a locaon that
calibrator and reference sensors
ful i ls the condions listed above. If the original packaging is not available, pack and store
lf l
the
as described below:
calibrator and reference sensors
1. Wrap the
in an anstac plasc ilm.
calibrator
f
2. Place the
, along with shock-absorbent material,
calibrator and reference sensors
in the packaging.
3. If stored for a prolonged period of me (more than 30 days), place a bag containing a
desiccant inside the packaging.
WARNING!
Before storing the
, the reference
calibrator
pressure sensor(s) and/or
temperature sensor
(following operaon), remove
)
LPC 200-T
(
LR-
Cal
any residual media. This is of parcular importance if the medium is
hazardous to health, e.g. causc, toxic, carcinogenic, radioacve, etc.
5.1 Transport
