DRUCK & TEMPERATUR Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • [email protected] •
• www.druck-temperatur.de
www.LR-Cal.net
MANUAL
TLDMM + TLDMM-A01
TLDMM-A02 + DFP
27
P 1-
Bring the instrument to 20% (P1), 40% (P2), 60% (P3), 80% (P4) and 100% (P5)
of the negave full scale value of the instrument and confirm with SET key.
P 2-
P 3-
Adjust the measurement using the Arrow-Up/Arrow-Down keys and
P 4-
confirm with SET key.
P 5-
End
The procedure is completed.
10.3 Absolute pressure ranges (only model
TLDMM)
LR-
Cal
• Make sure that the instrument is open to atmospere, no pressure applied to the instrument.
• Press ON and PEAK keys together for some seconds to enter the password se ng menu.
P0000
Enter the password 0022 via Arrow-Up/Arrow-Down keys and confirm with SET.
At
Indicates that if you press down again the SET key, you‘ll pass to atmosphere
pressure value regulaon.
1.0000
In this phase it is possible to select the atmospheric pressure value.
It is recommended to always refer to reliable reading, such like with XA1000
of DRUCK & TEMPERATUR Leitenberger GmbH, and not to alter reading with
an incorrect value.
End
The procedure is completed.
11. Declaraon of Conformity
DRUCK & TEMPERATUR Leitenberger GmbH, Bahnhofstr. 33, D-72138 Kirchentellinsfurt
declars that the products
TLDMM,
TLDMM-A01,
TLDMM-A02,
DFP
LR-
LR-
LR-
LR-
Cal
Cal
Cal
Cal
Type:
digital pressure measuring instruments
Opons:
covering all opons specified in this manual
conforms to the direcves
2004/108/CE + 2006/95/CE + 2011/65/EU
2002/96/CE (RAEE) - models
TLDMM-A01
LR-
Cal
TLDMM-A02
LR-
Cal
DFP
LR-
Cal
2012/19/UE (RAEE) - model
TLDMM
LR-
Cal
conforms to the norms
EN 61010-1 (2001) + EN 61326-1 (2007)
conforms to the regulaon
1907/2006 (REACH)
The product has been tested in the typical installaon configuraon, as described in this manual. Above described
products meet the requirements of menoned norms, basing on both, test results and consideraons listed in the
technical file.
I declare that the products defined above meet the requirements of the direcves, of the norms and regulaon
above menoned.
Kirchentellinsfurt, 20. November 2014
für DRUCK & TEMPERATUR Leitenberger GmbH, Kirchentellinsfurt
i.V.
(Gerd Broglie / Vertriebs- und Markengleitung)
