This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2013) Drivecon. All rights reserved.
Button
Value
Button
Value
1
digit/value 1
6
digit/value 6
2
digit/value 2
8+1
digit/value 7
3
digit/value 3
8+2
digit/value 8
4
digit/value 4
8+3
digit/value 9
6
digit/value 5
8+4
digit/value 0
LED 3 (red) is lit when one valid digit is entered.
LEDs 3,4 (red) are lit when the two valid digits are entered.
The top LED flashes (green) 3 times. The transmitter turns off.
NOTE! Button 8 = shift. To use shift:
1. Press button 8.
2. Press button 1-7.
3. Release button 1-7.
4. Release button 8.
AUTOMATIC SHUTDOWN
Turning on automatic shutdown can save battery capacity by automatically turning the transmitter off
when no function has been activated for a set of time.
Set the time for AUTOMATIC SHUTDOWN
1. Enter menu mode.
2. Go to [Auto Shutdown]. Select by pressing button 5.
The top LED lights (green). LED 2 flashes (red).
3. Select the time that you want for automatic shutdown by pressing the buttons according to the
table:
1 3 minutes
2 6 minutes
3 12 minutes
The top LED flashes green 3 times. The transmitter turns off.
16
Summary of Contents for PWR LYNK Series
Page 2: ......
