This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2013) Drivecon. All rights reserved.
REPLACE
You can replace a registered transmitter with another transmitter without having access to the receiver.
This process requires an (octal+1)* code. This number should be on a label under the rubber cover. If this
label is not present or obscured, you can determine this number with the help of a computer calculator.
Once your calculator is open, from the top menu bar select view, and then select programming. On the
right side of the window you will see several choices for representation, hex, dec, oct, and bin. Select
decimal. Now enter your transmitter’s serial number, located on the battery cover or on the circuit board
right under the battery cover. Now select the oct function from your calculator and your serial number will
transfer to octal code. Now add 1 to each digit to reach the (octal+1)* code.
For instance, if you enter 19659489, 112775341 would be your octal code. Adding one to each digit and
223886452 would be your (octal+1)* code.
1. Enter menu mode.
2. Go to [Replace mode]. Select by pressing button 3.
The top LED lights (green). LED 2 flashes (red).
3. Enter the (octal+1)* ID code (a maximum of 11 digits) for the transmitter that you want to
replace by pressing the buttons according to the table bellow:
1
digit/value 1
5
digit/value 5
2
digit/value 2
6
digit/value 6
3
digit/value 3
7
digit/value 7
4
digit/value 4
8
digit/value 8
LED 3 lights (red) when one or more digits are entered. LEDs 3+4 (red) light when 11 digits are
entered.
4. Press button for the last digit. Keep pressed.
5. Press the stop button.
The transmitter is sending the replace command (10 seconds). The transmitter turns off.
*Octal+1 ID code can only contain of digits 1-8.
14
Summary of Contents for PWR LYNK Series
Page 2: ......
