IDSOFT IFU (Iss 09/15)
Page 6
Legrest Operation
Pull up on the
lever on the
legrest (shown)
to allow the
legrest to swing
out.
To remove the
legrest, swing
out the legrest
approximately
45º then lift up
the legrest.
To adjust the angle of the legrest, turn the knob
(shown) anticlockwise to slacken. Reposition the leg
rest to the required angle and then turn the knob
clockwise to tighten and secure.
Slacken the screw (shown) to allow the calf pad to
reposition. When the pad is at the required position,
retighten the screw.
To alter the height of the footplate, slacken off the bolt
shown and reposition the footplate to the required
height. Retighten the screw to secure in place.
To alter the angle of the footplate, slacken off the bolt
shown and reposition the footplate to the required
angle. Retighten the screw to secure in place.
Anti-Tip Wheels
Pull the round disc (shown) and reposition the wheel to
the required height. Then release the round disc.
