1BHF t %3*45&&. 7BQPSMPHJD *OTUBMMBUJPO BOE 0QFSBUJPO .BOVBM
Operation
S e c u r i t y, d o w n l o a d i n g d a t a , a n d
d a t a b a c k u p a n d r e s t o r e
Security/password
To control who can change Vapor-logic4 settings, enable the
security function and define a password in the Setup menu. Enter
four digits, numbers only, and define the time-out period (minutes
of inactivity before Vapor-logic4 reverts to read-only mode). The
Web interface and the keypad/display can have separate passwords.
Important:
Write down this password and keep in a secure location.
Downloading historical data
Vapor-logic4 retains the following data sets:
r 3)IJTUPSZ TFWFOSPMMJOHEBZTPGEBUBBDRVJSFEBUPOFNJOVUF
intervals)
r 5FNQFSBUVSFIJTUPSZ TFWFOSPMMJOHEBZTPGEBUBBDRVJSFEBUPOF
minute intervals)
r 3)BOEUFNQFSBUVSFIJTUPSZ TFWFOSPMMJOHEBZTPGEBUBBDRVJSFE
at one-minute intervals)
r 8BUFSDPOWFSUFE QPVOETLJMPHSBNTPGXBUFSDPOWFSUFEUPTUFBN
since last reset)
r &OFSHZVTFE L8IPVSTPSUIFSNTVTFETJODFMBTUSFTFU
To download data, go to the download data section of the
Diagnostic screen.
Data backup and restore
Vapor-logic4 data can be backed up to a USB flash drive. The
backup file contains all information relative to the humidifier,
including firmware, user settings, model number, serial number,
and the configuration string.
Backup files use the serial number in the backup file name so that
the file is easily matched to a particular humidifier.
To create a backup file:
1. Insert a USB flash drive into the USB port on the Vapor-logic4
board.
2. Go to Diagnostics/USB backup-restore/Back up settings
3. Select Yes. The backup process is complete when LED-2 (see
Figure 62-1) illuminates.
To restore from a backup file:
1. Insert the USB flash drive with that humidifier’s backup file
into the USB port on the Vapor-logic4 board.
2. Go to Diagnostics/USB backup-restore/Restore settings
3. Select Yes. Note that the serial number of the humidifier and
backup file must match to complete the restore process.
