www.petsafe.net 9
FR
IT
NL
DE
EN
ES
.
Fountain Disassembly and Cleaning
• Pet Fountain must be cleaned to continue working normally.
• Never wash the filters with soapy water, as the soap residue will
seep into the filters and cannot be removed. Only rinse the filters
with water.
• Use only PetSafe
®
brand authorised replacement filters. If
unauthorised filters are used it may void the warranty.
Note:
Use a soft cloth or sponge to prevent scratching the Bowl.
CHARCOAL FILTER:
Replace Charcoal Filter every two to four weeks.
• Always rinse the Charcoal Filter prior to use.
• A small amount of charcoal dust may be released for the life of the filter, this is
normal and is not harmful to your pet.
• Replace filters more frequently when using the fountain for multiple pets or pets that
produce a lot of saliva.
FOAM FILTER:
Replace the Foam Filter every four to six weeks.
If you do not intend to replace the filter at the time of cleaning, rinse the Foam Filter
thoroughly with fresh water.
PET FOUNTAIN:
Clean the Pet Fountain once
a week.
1. Unplug the Pet Fountain and disconnect the in-line
plug (
Fig. 11
).
2. Carefully lift the Tower and allow the water to
slowly pour back into the Bowl. Once all the water
has been emptied into the Bowl, set the Tower
aside for cleaning (
Fig. 12
).
3. Take the Tower
and turn upside
down to remove
the Rubber
Grommet. Grab
the Rubber
Grommet from
inside and pull
straight out,
set aside for
cleaning (
Fig. 13
).
Fig. 11
Fig. 12
Fig. 13
