www.petsafe.net 13
FR
IT
NL
DE
EN
ES
.
10. Place the ceramic Tower inside the Bowl. The
Rubber Grommet will create a seal between the
Filter Housing and the Tower. Carefully lower the
Tower until it rests flat (
Fig. 25
).
11. Place the Pet Fountain in desired location. Do not
pick up a full fountain by the Tower piece. To
properly pick up the Pet Fountain, use both hands
and grip the sidewalls of the Bowl and lift up.
12. Fill the Pet Fountain by pouring water directly
into the Bowl. Leave at least 1.27 cm of space
between the water level and the rim of the Bowl
to help control spills and splashing. To protect
your floor always use a protective mat, such as a
towel or water-resistant placemat. This will help
protect your floor from splashing or spills caused
by your pet.
13. Before you plug in the Pet Fountain, make sure the
electrical power cord, the adaptor and your hands are completely dry. Connect the
in-line plug and make sure no silver is showing, (
Fig. 26
) then plug the adaptor into
a wall outlet.
The Pet Fountain and Your
Environment
If you live in a humid environment and have problems with mold or algae, soak all
fountain parts in a diluted vinegar solution (20% white vinegar and 80% water) for 10
minutes after regular cleaning. Also, pour the diluted vinegar solution into the Pump’s
motor cavity. If you have hard water, small white mineral deposits may form on or
inside the Pump. This can eventually prevent the impeller from turning properly. To avoid
replacement or damage to the Pump, please take the following precautions:
• Clean the Pump more frequently.
• Clean the Pump with a diluted vinegar solution weekly.
• Use bottled water instead of tap water.
General Tips
• When being introduced to the Pet Fountain, your pet may be cautious of this new
and unusual object. After beginning operation of your Pet Fountain, simply allow your
pet to adjust at his or her own pace. Some pets may take several days or longer to
begin use, while others will start right away.
Fig. 25
Fig. 26
