5
LASER CUTTER SAFETY WARNINGS
the chassis and increase the risk of eye
injury.
Do not operate the laser machine with
any of the panels removed. Remember
t h a t t h e l a s e r b e a m i s i n v i s i b l e !
Exposure of the laser beam will greatly
increase the risk of injury and/or fire.
Before using the laser machine, test the
ground fault circuit interrupter (GFCI)
provided with the supply cord to insure
it is operating correctly.
A properly
o p e r a t i n g G F C I r e d u c e s t h e r i s k o f
electrical shock.
Do not attempt to modify or defeat the
safety interlock system for any reason.
T h i s c o u l d r e s u l t i n e x p o s u r e t o
hazardous laser radiation.
Do not use laser cutter with extension
cords.
The GFCI on the machine power
cord will not prevent electrical shock
from the extension cords.
Comply with all codes, regulations and
laws, including those for hazardous or
noxious exhaust ventilation systems.
Consult with federal, state and/or local
authorities and applicable homeowner
or condominium associations to ensure
compliance of ventilation and exhaust
systems.
Failure to do so may result in
f i r e , e q u i p m e n t d a m a g e , p r o p e r t y
damage and/or personal injury, up to and
including death.
Consult a qualified installer or service
agency for information or assistance if
i n s t a l l a t i o n o f e x h a u s t / v e n t i n g i s
b e y o n d y o u r s k i l l l e v e l .
I m p r o p e r
i n s t a l l a t i o n , a d j u s t m e n t , a l t e r a t i o n ,
service, maintenance, or use can cause
fire, electric shock or other conditions
w h i c h m a y c a u s e p e r s o n a l i n j u r y ,
property damage or even death.
Maintain all manufacturer recommended
clearances during exhaust installation.
Failure to maintain proper clearances
could result in personal injury, death
and/or property damage.
W e a r p r o p e r p e r s o n a l p r o t e c t i v e
e q u i p m e n t s u c h a s s a f e t y g l a s s e s ,
protective clothing and work gloves
when performing exhaust connections.
Failure to do so may result in personal
injury.
Discontinue use and seek fresh air if
respiratory or eye irritation occurs.
E n s u r e v e n t i l a t i o n , e x h a u s t , a n d / o r
filtration systems are working according
t o m a n u f a c t u r e r s p e c i f i c a t i o n s a n d
make any necessary adjustments before
f u r t h e r u s e .
E x p o s u r e t o f u m e s m a y
c a u s e a l l e r g y , a s t h m a , b r e a t h i n g
d i f f i c u l t i e s o r o t h e r a d v e r s e h e a l t h
effects.
Always use provided work piece support
s t r u c t u r e w h e n c u t t i n g o r s c o r i n g .
Fabrication without honeycomb plate
m a y l e a d t o f i r e o r r e l e a s e o f s t r a y
radiation.
Do not use irregularly shaped work
piece.
Risk of stray radiation or fire.
Do not stack work pieces.
Stacking work
pieces increases the risk of fire.
Use only recommended accessories.
F o l l o w i n s t r u c t i o n s t h a t a c c o m p a n y
accessories. Use of improper accessories
may cause hazards
Ensure tools and parts such as spacer
puck, wrench, debris, etc. are removed
f r o m t h e h o n e y c o m b p l a t e b e f o r e
starting a laser job.
Objects or debris
may interfere with the laser head and
lead to stray radiation or risk of fire.
This product is provided with a GFCI
b u i l t i n t o t h e p o w e r c o r d p l u g .
I f
r e p l a c e m e n t o f t h e p l u g o r c o r d i s
needed, use only identical replacement
parts.
Do not try to clean exhaust ducting.
The
h i g h c o n c e n t r a t i o n o f p a r t i c l e s m a y
become airborne and create inhalation
exposure.
Do not spill water on the Hex Box™ unit.
Damage to electronics may occur.
Choice of material used during laser
cutter operation and subsequent health
c o n s e q u e n c e s
a r e
t h e
s o l e
responsibility of user.
Health effects of
materials used may not be documented
nor available.
DM 1600A01CX8 08-18 LC40 EN.qxp_LC40 8/17/18 10:32 AM Page 5
