Dream Vision Inti R699800 series, User Manual

Page: 45 / 56

9.0 MISCELLANEOUS
R699800 - Inti Series User Manual 45
Available Operating commands
RCU Commands and sending them through RS-232
Header (21h) Command Data Description
Connection RS-232 00h 00h none Check the serial connection
Power ON 50h 57h 31h If the projector is in stand-by mode, this command
switch the unit ON.
Power OFF 50h 57h 30h If the projector is powered ON, this command
switches this unit into Stand-by Mode.
Switch Input 49h 50h 32h Switch active input to Component
33h Switch active input to VGA
36h Switch active input to HDMI 1
37h Switch active input to HDMI 2
2Bh Switch to next input
2Dh Switch to previous input
Test Pattern 54h 53h 30h Test Patterns Off
31h Colour bars
36h Stair Step (black & white)
37h Stair Step (red)
38h Stair Step (green)
39h Stair Step (blue)
41h Crosshatch (green)
Gamma 47h 54h 30h Set Gamma to Normal
31h Set Gamma to A
32h Set Gamma to B
33h Set Gamma to C
34h Set Gamma to Custom1
35h Set Gamma to Custom2
36h Set Gamma to Custom3
37h Set Gamma to D
Gamma Value
(Gamma set to
Custom1-3) 47h 50h 30h Set value to 1.8
31h Set value to 1.9
32h Set value to 2.0
33h Set value to 2.1
34h Set value to 2.2
35h Set value to 2.3
36h Set value to 2.4
37h Set value to 2.5
38h Set value to 2.6
Header (21h) Command Data Description
Power ON 52h 43h 37h 33h 30h 35h Switch the unit ON
Power OFF 52h 43h 37h 33h 30h 36h Switch this unit into Stand-by mode
Switch input 52h 43h 37h 33h 30h 38h Switch to next input
37h 33h 34h 36h Switch active input to VGA
37h 33h 34h 44h Switch active input to Component
37h 33h 37h 30h Switch active input to HDMI 1
37h 33h 37h 31h Switch active input to HDMI 2
Keypad 52h 43h 37h 33h 30h 31h UP
37h 33h 30h 32h DOWN
37h 33h 30h 33h BACK
37h 33h 32h 45h MENU
37h 33h 32h 46h OK
37h 33h 33h 34h RIGHT
37h 33h 33h 36h LEFT