6.0 MENU AND PICTURE SETTING
36
R699800 - Inti Series User Manual
Line Display
5sec: Display the input settings for 5 seconds after input selection.
Off: Don’t display.
Source Display
On: Display the source of the input signals after input selection.
Off: Don’t display.
Logo
On: Display logo during startup for 5 seconds.
Off: Don’t display.
Language
Choose the OSD language between: English, Japanese, German, Spanish, Italian, French, Portuguese, Dutch,
Swedish, Norvegian, Russian and Chinese.
6.6
Function Menu
Trigger
The 12V trigger output can be used to control any compatible devices such as motorized screens or anamorphic
kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:
•
Off: 12V trigger voltage state is always low.
•
On (Power):12V trigger state is high when the projector is powered ON.
•
On(Anamo): 12V trigger is high only when Anamorphic Mode A or Mode B is engaged. To be used with
anamorphic kits or motorized screens.
Off-Timer
You can configure this automatic power Off function that will switch off the projector when there is no operation or
after a determined timer. Choose the duration of the timer between: Off, 1 hour, 2 hours, 3 hours and 4 hours.
High Altitude Mode
Select this when the projector is in a location of low atmospheric pressure. On or Off.
Communication Terminal (Inti 2 & Inti 3)
Sets on which input is connected the control device. It is not possible to use it at the same time both RS-232C and
LAN inputs. Settings: RS-232C, LAN.
Network (Inti 2 & Inti 3)
When the Communication Terminal selected is LAN, this unit will be visible on the local Network and the following
parameters need to be configured. See “LAN protocole (Inti 2 & Inti 3)”, page 49 for more details.
Lamp Reset
Resets the lamp use time to "0" during the lamp replacement procedure. See “Replacing the Lamp”, page 41 for
more details.
6.7
Information Menu
Input Source
Displays the active video input.
Source
Displays the type of the current video input signal. If PC input is selected, this item cannot be displayed.
Resolution
If the active input is PC input., its resolution is displayed.
H. Frequency
In the case of PC signal, the horizontal frequency is displayed.
V. Frequency
In the case of PC signal, the vertical frequency is displayed.
Summary of Contents for Inti R699800 series
Page 1: ......
Page 54: ...9 0 MISCELLANEOUS 54 R699800 Inti Series User Manual ...
Page 55: ......
Page 56: ......
