Dream Vision Inti R699800 series, User Manual

Page: 39 / 56

7.0 ANAMORPHIC LENS
R699800 - Inti Series User Manual 39
7.3 2.35 CineWide
Video source is 16:9: set [Anamo]rphic to Mode B
When you select a 16:9 input with a permanent anamorphic lens, choose the anamorphic mode B to obtain a
geometrically correct picture in your screen.
• Select Mode B for this input into the menu “Installation
⇒ ⇒
⇒ ⇒
Anamorphic
⇒ ⇒
⇒ ⇒
Mode B”.
Video source is Cinemascope: set [Anamo]rphic to Mode A
When selecting a widescreen input (2.35:1, 2.37:1 or 2.40:1), the original aspect ratio of the source is larger than
16:9, you can see black bars on the top and the bottom of the screen.
• Select Mode A for this input into the menu “Installation
⇒ ⇒ ⇒ ⇒
Anamorphic
⇒ ⇒ ⇒ ⇒
Mode A”.
Quick [Anamo]rphic mode change on the same input
To obtain the correct aspect ratios, choose Mode A for widescreen movies (format 2.35:1) and Mode B for HDTV
(native format 16:9).
You can also use the Remote Control Unit by pressing the [Anamo] button to switch between these two modes.
7.4 2.35 THEATRE System (for Inti)
Plug the 12V Trigger output of the projector to the Anamorphic motorization
Connect the 2.35 THEATRE System (for Inti) to the 12V Trigger output
Configure into Function “Menu
⇒ ⇒ ⇒ ⇒
Trigger
⇒ ⇒ ⇒ ⇒
On (Anamo)”
Appearance
Mode B
... press [Anamo] button to obtain the correct anamorphic mode.
When the source automatically switches format...
on 2.35 screen
16:9 format
2.35:1 format
16:9 on 2.35 screen
2.35 on 2.35 screen
Mode A
12V Trigger
to anamorphic
motorization