Dream Vision Inti R699800 series, User Manual

Page: 49 / 56

9.0 MISCELLANEOUS
R699800 - Inti Series User Manual 49
Examples
9.2 LAN protocole (Inti 2 & Inti 3)
LAN / RJ-45 communication specification
To set the projector to LAN Control Mode, go to the Function menu, then set the Communication Terminal from RS-
232C (default) to LAN.
The network settings may have to be modified in the projector’s network menu to match your current LAN network.
• DHCP Client: When set to ON, the projector’s IP address will be automatically set by the DHCP server. on the
LAN.
• IP Address: Sets the IP (Internet Protocol) address of the projector. A valid address must be set for this unit.
• Subnet Mask: Sets the Subnet Mask
• Default Gateway: Sets the Default IP Gateway of the projector.
• MAC Address: A 6 byte hex number that uniquely identifies the projector on the LAN. The value is unique to
each individual unit on the LAN network.
The first step to verify that the network configuration of this unit has been correctly set is to ping the projector from a
computer on the network using the command prompt.
Gamma Value
(header 3Fh) 47h 50h Check the current Gamma value 30h: 1.8
31h: 1.9
32h: 2.0
33h: 2.1
34h: 2.2
35h: 2.3
36h: 2.4
37h: 2.5
38h: 2.6
You want to... Command to send
Check if the projector is switched ON
send: 3Fh 89h 01h 50h 57h 0Ah
receive: 06h 89h 01h 50h 57h 0Ah (confirm cmd)
receive: 40h 89h 01h 50h 57h 31h 0Ah (projector is ON)
Which input is active
send: 3Fh 89h 01h 49h 50h 0Ah
receive: 06h 89h 01h 49h 50h 0Ah (confirm cmd)
receive: 40h 89h 01h 49h 50h 36h 0Ah (HDMI 1 is active)