Draytek VigorAP 906 User Manual Download Page 90

Page: 90 / 171

Available settings are explained as follows:

Item Description

Enable

Check it to enable the hotspot web portal settings.

Comments

Enter a brief description for this profile.

Portal Server

Captive Portal URL -

Enter the captive portal URL.

Redirection URL -

Enter the URL to which the client will be redirected.

Landing page

Fixed URL

- Enter the URL as the landing page for wireless clients.

Applied Interfaces

SSID1 to SSID4

- The current Hotspot Web Portal profile will be in

effect for the selected WLAN SSIDs.

Save and Next

Click to access into next page.

After finishing this web page configuration, please click

Save and Next

for the next setting page.

(2) RADIUS Settings

Configure the external RADIUS server for mutual authentication.

Summary of Contents for VigorAP 906












































































































































































Search results

Summary of Contents for VigorAP 906

Reviews:

Draytek VigorAP 906, User Manual, Page: 90 / 171

Search results

Summary of Contents for VigorAP 906

Reviews: