manualshive.com logo in svg

Draytek VigorAP 906, User Manual, Page: 47 / 171

Share
Download
Draytek VigorAP 906 User Manual Download Page 47

 

 

39 

II-3-3 Access Control 

For additional security of wireless access, the 

Access Control

 facility allows you to restrict the 

network access right by controlling the wireless LAN MAC address of the client. Only the valid MAC 
address that has been configured can access the wireless LAN interface. By clicking the 

Access 

Control

, a new web page will appear, as depicted below, so that you could edit the clients' MAC 

addresses to control their access rights (deny or allow). 

 

Available settings are explained as follows: 

Item Description 

Policy 

Select to enable any one of the following policies or disable the policy. 
Choose 

Activate MAC address filter

 to type in the MAC addresses 

for other clients in the network manually. Choose

 Blocked MAC 

address filter, 

so that all of the devices with the MAC addresses listed 

on the MAC Address Filter table will be blocked and cannot access into 
VigorAP 906. 

 

Summary of Contents for VigorAP 906












































































































































































Reviews:

No comments