manualshive.com logo in svg

Draytek VigorAP 906, User Manual, Page: 139 / 171

Share
Download
Draytek VigorAP 906 User Manual Download Page 139

 

 

131 

Item Description 

Set to Factory Default 

Click it to return to the factory default setting and remove all the 
device group profiles. 

Index 

Display the index number of the device group profile. 

Name 

Display the name of the device group profile. 

Click any index number link to create a new device group profile. 

 

Available settings are explained as follows:   

Item Description 

Name 

Enter the name of the new group profile. 

Available Device 
Objects 

Display currently available device objects.   
Choose the one(s) and click the >> button to move them under the 
Selected IP Objects. 

Selected Device 
Objects 

Display the selected device objects.   
Choose the one(s) and click the << button to discard the selections. 

OK 

Save the settings. 

Clear 

Remove the settings. 

Cancel 

Discard the settings and return to the previous page. 

 

Summary of Contents for VigorAP 906












































































































































































Reviews:

No comments