manualshive.com logo in svg

Draytek VigorAP 906, User Manual, Page: 137 / 171

Share
Download
Draytek VigorAP 906 User Manual Download Page 137

 

 

129 

 

Choose the one(s) you want and click 

OK

. The selected entries will be 

listed on the Device Object Profiles. 

Create from Wireless 
Neighbor Table 

Click the link to open the following page. 

 

Choose the one(s) you want and click 

OK

. The selected entries will be 

listed on the Device Object Profiles. 

Create from ARP Table 

Click the link to open the following page. 

 

Choose the one(s) you want and click 

OK

. The selected entries will be 

listed on the Device Object Profiles. 

Set to Factory Default 

Click it to return to the factory default setting and remove all the 
device object profiles. 

Index 

Display the index number of the device object profile. 

MAC 

Display the MAC address specified by the device object profile. 

Name 

Display the name of the device object profile. 

In addition to choosing from the wireless station table, neighbor table, or ARP table, you can click 
any index number link to create a new device object profile by entering the name and MAC address 
manually. 

Summary of Contents for VigorAP 906












































































































































































Reviews:

No comments