manualshive.com logo in svg

Draytek VigorAP 903, User Manual

Share
Download
Draytek VigorAP 903 User Manual Download Page 124

 

 

118

Weekday 

Choose and check the day to perform the schedule. It is available when 
Routine is selected as Acts. 

3.

 

After finishing this web page configuration, please click OK to save the settings. A new schedule 
profile has been created and displayed on the screen. 

 

IV-2-2 Apple iOS Keep Alive 

To keep the wireless connection (via Wi-Fi) on iOS device in alive, VigorAP 903 will send the UDP packets 
with 5353 port to the specific IP every five seconds. 

 

Available settings are explained as follows: 

Item Description 

Enable Apple iOS Keep 
Alive 

Check to enable the function. 

Index 

Display the setting link. Click the index link to open the configuration page 
for setting the IP address. 

Apple iOS Keep Alive 
IP Address 

Display the IP address. 

Click OK to save the settings. 

Summary of Contents for VigorAP 903


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands