Draytek VigorAP 903 User Manual Download Page 114

Page: 114 / 153

108

Once you check/uncheck the box of Enable Mobile Device Management and click OK, VigorAP will
reboot automatically to activate MDM.

At present, OS (for mobile device) categories supported by VigorAP include:



Windows



Linux



iOS



Andorid



WindowsPhone



BlackBerry



Symbian

III-3-2 Policies

Such page determines which devices (mobile, PC, MAC or others) allowed to make network connections via
VigorAP or blocked by VigorAP.

Each item is explained as follows:

Item Description

Block Mobile
Connections

All of mobile devices will be blocked and not allowed to access into Internet
via VigorAP.

Block PC Connections

All of network connections based on PC, MAC or Linux platform will be
blocked and terminated.

Block Unknown
Connections

Only the unknown network connections (unable to be recognized by Vigor
router) will be blocked and terminated.

WiFi(2.4GHz)

Specify the SSID(s) to apply such policy.

WiFi(5GHz)

Specify the SSID(s) to apply such policy.

After finished the policy selection, click OK. VigorAP will

reboot

to activate the new policy automatically.

Summary of Contents for VigorAP 903


























































































































































Search results

Summary of Contents for VigorAP 903

Reviews:

Brands by name

Popular brands

Draytek VigorAP 903, User Manual

Search results

Summary of Contents for VigorAP 903

Reviews:

Brands by name

Popular brands