Draytek Vigor2620 Series, User Manual, Page: 92 / 610

Vigor2620 Series User’s Guide 80
I
I
I
I
-
-
2
2
-
-
2
2
-
-
7
7
D
D
e
e
t
t
a
a
i
i
l
l
s
s
P
P
a
a
g
g
e
e
f
f
o
o
r
r
P
P
P
P
T
T
P
P
To use PPTP as the accessing protocol of the internet, please click the PPTP tab. The
following web page will be shown.
Available settings are explained as follows:
Item Description
PPTP Enable - Click this radio button to enable a PPTP client to
establish a tunnel to a DSL modem on the WAN interface.
Disable – Click this radio button to close the connection
through PPTP.
Server Address - Specify the IP address of the PPTP server if
you enable PPTP client mode.
Specify Gateway IP Address – Specify the gateway IP address
for DHCP server.
ISP Access Setup Username -Enter the username provided by ISP in this field.
The maximum length of the user name you can set is 63
characters.
Password -Enter the password provided by ISP in this field.
The maximum length of the password you can set is 62
characters.
Index (1-15) in Schedule Setup - You can Enter four sets of
time schedule for your request. All the schedules can be set
previously in Application >> Schedule web page and you can
use the number that you have set in that web page.
MTU It means Max Transmit Unit for packet.
Path MTU Discovery – It is used to detect the maximum MTU
size of a packet not to be segmented in specific transmit
path.
Click Detect to open the following dialog.