manualshive.com logo in svg

Draytek Vigor2620 Series, User Manual, Page: 69 / 610

Share
Download
Draytek Vigor2620 Series User Manual Download Page 69

 

Vigor2620 Series User’s Guide 

57 

 

Available settings are explained as follows: 

Item Description 

Enable 

Choose Yes to invoke the settings for this WAN interface. 

Choose No to disable the settings for this WAN interface. 

Display Name 

Enter the description for such WAN interface.     

Physical Mode 

Display the physical mode of this WAN interface. 

DSL Mode 

Specify the physical mode (Auto, VDSL2 or ADSL) for such 
router manually. 

DSL Modem Code 

Choose the correct DSL modem code for ensuring the 

network connection.   
If you have no idea about the selection, simply choose 

Default or contact the dealer for assistance. 

VLAN Tag insertion 

Enable – Enable the function of VLAN with tag.   
The router will add specific VLAN number to all packets on 
the WAN while sending them out.   
Please Enter the tag value and specify the priority for the 
packets sending by WAN interface. 
Disable – Disable the function of VLAN with tag. 
Tag value – Enter the value as the VLAN ID number. The 

range is from 0 to 4095. 
Priority – Enter the packet priority number for such VLAN. 

The range is from 0 to 7. 

After finished the above settings, click OK to save the settings. 

Summary of Contents for Vigor2620 Series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments