manualshive.com logo in svg

Draytek Vigor2620 Series, User Manual, Page: 303 / 610

Share
Download
Draytek Vigor2620 Series User Manual Download Page 303

 

Vigor2620 Series User’s Guide 

291 

3.

 

The following screen will appear. Simply click OK. 

 

4.

 

Log out Vigor router web user interface by clicking the Logout button. 

 

5.

 

The following window will be open to ask for username and password. Enter the new user 

password in the filed of Password and click Login. 

 

6.

 

The main screen with User Mode will be shown on the web page. 

Settings to be configured in User Mode will be less than settings in Admin Mode. Only basic 
configuration settings will be available in User Mode. 

 

 

Info 

 

Setting in User Mode can be configured as same as in Admin Mode. 

Summary of Contents for Vigor2620 Series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments