manualshive.com logo in svg

Draytek Vigor2620 Series, User Manual, Page: 27 / 610

Share
Download
Draytek Vigor2620 Series User Manual Download Page 27

 

Vigor2620 Series User’s Guide 

15 

Host connected physically to the router via LAN port(s) will be displayed with green circles in 
the field of Connected. 

All of the hosts (including wireless clients) displayed with Host ID, IP Address and MAC address 
indicates that the traffic would be transmitted through LAN port(s) and then the WAN port. 

The purpose is to perform the traffic monitor of the host(s).   

I

I

-

-

5

5

-

-

4

4

 

 

G

G

U

U

I

I

 

 

M

M

a

a

p

p

 

 

 

All the functions the router supports are listed with table clearly in this page. Users can click 

the function link to access into the setting page of the function for detailed configuration. 
Click the icon on the top of the main screen to display all the functions. 

 

Summary of Contents for Vigor2620 Series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments