manualshive.com logo in svg

Draytek Vigor2620 Series, User Manual, Page: 379 / 610

Share
Download
Draytek Vigor2620 Series User Manual Download Page 379

 

Vigor2620 Series User’s Guide 

367 

4.

 

After finished the settings, click OK to return to previous page. Now you have finished 
the configuration of the SMS Provider profile setting. 

 

5.

 

Open Object Settings>>Notification Object to configure the event conditions of the 

notification. 

 

6.

 

Choose any index number (e.g., Index 1 in this case) to configure conditions for sending 
the SMS. In the following page, Enter the name of the profile and check the 

Disconnected and Reconnected boxes for WAN to work in concert with the topic of this 
paper. 

 

Summary of Contents for Vigor2620 Series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments