manualshive.com logo in svg

Draytek Vigor2620 Series, User Manual, Page: 380 / 610

Share
Download
Draytek Vigor2620 Series User Manual Download Page 380

 

Vigor2620 Series User’s Guide   

368 

7.

 

After finished the settings, click OK to return to previous page. You have finished the 
configuration of the notification object profile setting. 

 

8.

 

Now, open Applications >> SMS Alert Service. Use the drop down list to choose SMS 
Provider and the Notify Profile (specify the time of sending SMS). Then, Enter the phone 
number in the field of Recipient Number (the one who will receive the SMS). 

 

9.

 

Click OK to save the settings. Later, if one of the WAN connections fails in your router, 
the system will send out SMS to the phone number specified. If the router has only one 

WAN interface, the system will send out SMS to the phone number while reconnecting 
the WAN interface successfully. 

Summary of Contents for Vigor2620 Series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments