manualshive.com logo in svg

Draytek Vigor 3200 Series, User Manual, Page: 52 / 356

Share
Download
Draytek Vigor 3200 Series User Manual Download Page 52

 

Vigor3200 Series User’s Guide

 

42

9.

 

Setup two applications profiles (named PC1 and PC2) for SSL VPN. 

 

10.

 

Setup two SSL Web Proxy Servers profiles (named google and baidu) for SSL 
VPN. 

 

11.

 

Go to 

SSL VPN >>User Group

 to setup two separate groups (named with g1 

and g2) with different authorities and different authentication methods.

 

 

Different departments should have separated access authorities. For example, 
RD1 can only access Google web site and connect to PC1 via VNC; while RD2 
can only access Baidu web site and connect to PC2 via RDP. Therefore,   

Set the user group profile (named g1) for RD1 department: 

Summary of Contents for Vigor 3200 Series





































































































































































































































































































































































Reviews:

No comments