Draytek Vigor 3200 Series User Manual Download Page 118

Page: 118 / 356

Vigor3200 Series User’s Guide

108

Each item is explained as follows:

Item Description

Index

Display the WAN interface.

Display Name

It shows the name of the
WAN1/WAN2/WAN3/WAN4/WAN5 that entered in general
setup.

Physical Mode

It shows the physical connection for WAN1-WAN4 (Ethernet)
/WAN5 (3G USB Modem) according to the real network
connection.

Access Mode

Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click

Details Page

for accessing the page to configure the settings.

Details Page

This button will open different web page according to the
access mode that you choose in WAN interface

Summary of Contents for Vigor 3200 Series





































































































































































































































































































































































Search results

Summary of Contents for Vigor 3200 Series

Reviews:

Draytek Vigor 3200 Series, User Manual, Page: 118 / 356

Search results

Summary of Contents for Vigor 3200 Series

Reviews: