Draytek Vigor 3200 Series User Manual Download Page 189

Page: 189 / 356

Vigor3200 Series User’s Guide

179

Click the number under Index column for settings in detail.

Available settings are explained as follows:

Item Description

Name

Type a name for this profile. Maximum 15 characters are
allowed.

Interface

Choose WAN, LAN or Any to display all the available IP
objects with the specified interface.

Available IP Objects

All the available IP objects with the specified interface chosen
above will be shown in this box.

Selected IP Objects

Click

button to add the selected IP objects in this box.

After finishing all the settings here, please click

to save the configuration.

Summary of Contents for Vigor 3200 Series





































































































































































































































































































































































Search results

Summary of Contents for Vigor 3200 Series

Reviews:

Draytek Vigor 3200 Series, User Manual, Page: 189 / 356

Search results

Summary of Contents for Vigor 3200 Series

Reviews: