manualshive.com logo in svg

Draytek Vigor 3200 Series, User Manual, Page: 273 / 356

Share
Download
Draytek Vigor 3200 Series User Manual Download Page 273

 

Vigor3200 Series User’s Guide 

263

VPN Load Balance 
Policy 

Below shows the algorithm for Load Balance. 

Edit

 – Click this radio button for assign a blank table for 

configuring Binding Tunnel. 

After insert

 – Click this radio button to adding a new binding 

tunnel table. 

Tunnel Bind Table Index

- 128 Binding tunnel tables are 

provided by this device. Specify the number of the tunnel for 
such Load Balance profile. 

Active

 – In-active/Delete can delete this binding tunnel table. 

Active can activate this binding tunnel table. 

Binding Dial Out Index

 – Specify connection type for 

transmission by choosing the index (LAN to LAN Profile 
Index) for such binding tunnel table. 

Scr IP Start /End

– Specify source IP addresses as starting 

point and ending point. 

Dest IP Start/End

 – Specify destination IP addresses as 

starting point and ending point. 

Dest Port Start /End

– Specify destination service port as 

starting point and ending point. 

Protocol

 – 

Any

 means when the source IP, destination IP, 

destination port and fragment conditions match with the 
settings specified here, such binding tunnel table can be 
established for TCP Service Port/UDP Service 
Port/ICMP/IGMP specified here.

   

TCP

 means when the source IP, destination IP, destination 

port and fragment conditions match with the settings specified 
here and TCP Service Port also fits the number here, such 
binding tunnel table can be established. 

UDP 

means when the 

source IP, destination IP, destination port and fragment 
conditions match with the settings specified here and UDP 
Service Port also fits the number here, such binding tunnel 
table can be established. 

TCP/UPD

 means when the source IP, 

destination IP, destination port and fragment conditions match 
with the settings specified here and TCP/UDP Service Port 
also fits the number here, such binding tunnel table can be 
established.

 ICMP

 means when the source IP, destination IP, 

destination port and fragment conditions match with the 
settings specified here and ICMP Service Port also fits the 
number here, such binding tunnel table can be established. 
IGMP means when the source IP, destination IP, destination 
port and fragment conditions match with the settings specified 
here and IGMP Service Port also fits the number here, such 
binding tunnel table can be established.

 Other 

means when the 

source IP, destination IP, destination port and fragment 
conditions match with the settings specified here with different 
TCP Service Port/UDP Service Port/ICMP/IGMP, such 
binding tunnel table can be established.

 

Summary of Contents for Vigor 3200 Series





































































































































































































































































































































































Reviews:

No comments