Draytek Vigor 3200 Series User Manual Download Page 147

Page: 147 / 356

Vigor3200 Series User’s Guide

137

Available settings are explained as follows:

Item Description

Port Mirror

Check

Enable

to activate this function. Or, check

Disable

close this function.

Mirror Port

Select a port to view traffic sent from mirrored ports. At
present, only WAN4 will be treated as mirror port.

When

Port Mirror

is enabled, the

Mirror Port

(WAN4) will

be disabled.

Mirrored port

Select which ports (LAN port or WAN port) are necessary to
be mirrored. P1 represents LAN port.

After finishing all the settings here, please click

to save the configuration.

Summary of Contents for Vigor 3200 Series





































































































































































































































































































































































Search results

Summary of Contents for Vigor 3200 Series

Reviews:

Draytek Vigor 3200 Series, User Manual, Page: 147 / 356

Search results

Summary of Contents for Vigor 3200 Series

Reviews: