Draytek Vigor 3200 Series, User Manual, Page: 145 / 356

Vigor3200 Series User’s Guide 135
Subnet Choose one of them to make the selected VLAN mapping to
the specified subnet only. For example, LAN1 is specified for
VLAN0. It means that PCs grouped under VLAN0 can get the
IP address (es) that specified by the subnet.
After finishing all the settings here, please click OK to save the configuration.
Note: Settings in this page only applied to LAN port but not WAN port.
4
4
.
.
2
2
.
.
5
5
B
B
i
i
n
n
d
d
I
I
P
P
t
t
o
o
M
M
A
A
C
C
This function is used to bind the IP and MAC address in LAN to have a strengthening control
in network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Available settings are explained as follows:
Item Description
Enable Click this radio button to invoke this function. However,
IP/MAC which is not listed in IP Bind List also can connect to
Internet.
Disable Click this radio button to disable this function. All the settings
on this page will be invalid.