27
EQUALISER - Page 1
EQUALISER - Page 2
Turn the knob to select the type of
filter that is required on Lo and Mid
bands.
The selected filter type will be
shown in the Low and High band
boxes on Page 1.
This Marker shows the centre
frequency of the selected band.
The Graphical display shows the
overall EQ Boost/Cut that has been
applied by setting the Gain, Fre-
quency and the Bandwidth..
The Gain Reduction shows when
the Gain Management has reduced
the EQ level.
This is the Bar meter showing the
Manual Gain Trim level that has
been applied.
When Pv is selected. Use the Left
or Right button to step along the
Parameters of each band.
Push the control knob to select
Gain, Frequency or Bandwidth.
Push the knob to enter the selection.
