Contents
Chapter 1 Preface
……………………………………………………………………………
1
1. Safety
………………………………………………………………………………
1
2. General
……………………………………………………………………………………
1
3. Electrical
…
………………………………………………………………………………
1
4. Warning…………………………………………………………………………………………………….. 1
5. Performance……………………………………………………………………………………………….. 2
6. Radio Interference ………………………………………………………………………………………2
Chapter 2 Introduction of the Instrument.........................................................3
1. Brief Introduction of the instrument...................................................................3
2. Working Principle
………………………………………………………………………
4
3. Structure...........................................................................................4
4. Unpacking Instructions………………………………………………………………………………….5
5. Specifications……………………………………………………………………………………………….5
Chapter 3 Install Instrument
……………………………………………………………
6
1. Environment Required
…………………………………………………………………
6
2. Voltage Confirmation
…………………………………………………………………
6
3. Installation
………………………………………………………………………………
6
Chapter 4 Operation Introduction
………………………………………………………
7
1. Software Structure
………………………………………………………………………
7
2. Basic Operation
…………………………………………………………………………
8
2.1 Choose Photometric Mode
………………………………………………………
8
2.2 Set Wavelength
……………………………………………………………………
8
2.3 Set Parameters
…………………………………………………………………… 8
2.4 Set the position of auto-cell holder
………………………………………………
8
2.5 Delete the Input Value
…………………………………………………………… 8
2.6 Delete the test result and stored data
……………………………………………
8
2.7 Calibrate 100%T/0Abs
……………………………………………………………
8
2.8 Measure Samples
………………………………………………………………… 8
2.9 Print the test result
…………………………………………………………………
9
3. Preparation before test
………………………………………………………………
9
3.1 Switch on the instrument and begin the system self-test
………………………9
3.2 Pre-warm
……………………………………………………………………………
9
3.3 Check the cuvettes
…………………………………………………………………
9
4. Measurement
……………………………………………………………………………
9
4.1 Photometry
…………………………………………………………………………
9
4.2 Quantitative
………………………………………………………………………
11
4.3 Setup
……………………………………………………………………………
17
