DRALLE sScale, Manual

Page: 34 / 52

28
4. Presentation of results
4.1. Photo-optic measurement
The results of a photo-optic measurement are shown in different locations. Thus, in the user
interface “Result” (see Chapter A.2.2.7), conformity -rated results can be found alongside
other, non-conformity-rated results. While the conformity-rated results are presented in full,
the “Result” user interface provides only an excerpt of the main non -conformity-rated results.
Conformity-rated results are always displayed in green (see Figure 19), these are:
 the area of the woodpile contour enclosed by the polygonal course
 the polygonal course itself
 the woodpile picture with integrated, after saving non-changeable polygonal course
 the system-internal, unique Woodpile ID (Guid) as per template
g<nnn> <xxxx> <mmmmmmmmmmmmm>
In addition, with photo- optic measurement results there is the note: “Information highlighted
green is conformity-rated according to the Measurement and Verification Act; see Operating
Instructions!”
Figure 20: Result representation of a conformity- rated measurement in the user interface “Result”
Non-conformity-rated results are always shown white. These are:
 the woodpile volume in cubic metres (container volume, i.e. cubic metre)
 the area of the rear side in square metres (if recorded manually)
 the length of the woodpile in metres
 the average height of the woodpile in metres
 the average diameter of the individual logs
 an estimation of the number of logs in the woodpile
In the user interface “Details of an archive entry” (see Chapter A.2.2.5) you can find further
data additionally to the sizes listed above. Here, too, the conformity-rated results are always
highlighted green (see Figure 20).