DRALLE sScale, Manual

Page: 33 / 52

27
3.3.3. TwoStep-function
As of September 2018 a new function has been introduced, called ‘TwoStep’. TwoStep allows
for the merger of the measurements described in Chapter A.3.3.1. (max. 2 measurements).
The procedure for this is the following:
 Take picture of part 1 of the stack
 Start the analysis
 Under the ‘give ID menu’ push a button with a small scissor icon on it. Stak ID is au-
tomatically called ‘Combine’
 In top left corner, just to the right of the sScale logo, this green icon appears :
 Finish edit part 1 and push submit
 Take pictures of part 2 of the stack
 Start the analysis
 Under the ‘give ID menu’, give/select the stack’s id
 Finish the editing and push ‘submit’
 A box will pop up with two options:

Left/Right

Top/Bottom

Choose the option that fits the stack
 Push submit in the pop up box.
The results will be a shown in Figure 19:
Figure 19 : Presentation of the merger of two measuremetns by the ‘TwoStep’ -function