manualshive.com logo in svg

Dräger Polaris 600, Instructions For Use Manual, Page: 80 / 96

Share
Download
Dräger Polaris 600 Instructions For Use Manual Download Page 80

Maintenance

80

 Instructions for use

 

Polaris 600  

Acceptance and handover

Polaris 600 light

Upon conclusion of the installation or maintenance 

work, the system must be tested and accepted by 

specialized service personnel.

Commissioning DrägerService is recommended.

These tests determine
– whether the safety requirements necessary to 

protect the patient and personnel have been 

met, and

– whether the entire functional range of the 

systems is met.

The inspection results must be documented in 

writing.

After acceptance, the operational system is 

handed over to its owner along with the associated 

documentation. A written record of the handover is 

filed for reference.

The users are instructed on the use of the system.

Polaris 600 remote control for MedView camera

It may be necessary to change the room address if 

MedView cameras are operated by remote control 

in adjacent operating rooms which are only 

separated by a pane of glass.

The room address of the remote control and of the 

remote control interface can only be changed by 

DrägerService.

Summary of Contents for Polaris 600

































































































Reviews:

No comments