manualshive.com logo in svg

Dräger Polaris 600, Instructions For Use Manual, Page: 73 / 96

Share
Download
Dräger Polaris 600 Instructions For Use Manual Download Page 73

Instructions for use

 

Polaris 600  

73

Maintenance

Maintenance

Overview

This chapter describes the maintenance measures 

required to maintain the proper functioning of the 

medical device. Maintenance measures must be 

performed by the personnel responsible.

Definitions of maintenance terms

Inspection

Regular inspections must be carried out according 

to the following specifications and at the stated 

intervals. Technical documentation is available on 

request.

WARNING

Risk of infection

The responsible personnel may be infected 

by pathogenic germs.

Disinfect and clean device or device parts 

before any maintenance measures and also 

before returning the medical device for repair.

WARNING

Risk of electric shock

There are conducting components under the 

housing cover.

– Do not remove the housing cover.

– Maintenance measures must be 

performed by the personnel responsible. 

Dräger recommends DrägerService for 

repairs and complex maintenance tasks.

Term

Definition

Maintenance

All measures (inspection, preventive maintenance, repair) intended to maintain 

and restore the functional condition of a medical device

Inspection

Measures intended to determine and assess the actual state of a medical device

Preventive mainte-

nance

Recurrent specified measures intended to maintain the functional condition of a 

medical device

Repair

Measures intended to restore the functional condition of a medical device after a 

device malfunction

WARNING

Risk of electric shock

Disconnect all electrical connections from the 

power supplies before carrying out any work.

Summary of Contents for Polaris 600

































































































Reviews:

No comments