Dräger Movita Instructions For Use Manual Download Page 4

Page: 4 / 58

Contents

Instructions for use Movita

Contents

For your safety and that of your patients

. . .

General safety information . . . . . . . . . . . . . . . .

Product-specific safety information . . . . . . . . .

Application

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . .

Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Ceiling supply unit . . . . . . . . . . . . . . . . . . . . . . 11
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Definitions of the load descriptions. . . . . . . . . . 15

Assembly and preparation

. . . . . . . . . . . . . . 16

Positioning and connecting devices . . . . . . . . . 16

Operation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Releasing the locking brakes . . . . . . . . . . . . . . 22
Positioning the ceiling supply unit . . . . . . . . . . 23
Movita lift: Electrically-operated height
adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Movita lift: Media column with device
mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Lighting (optional). . . . . . . . . . . . . . . . . . . . . . . 30

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . 32

Fault – Cause – Remedy . . . . . . . . . . . . . . . . . 32
Movita lift: Emergency operation of the
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Cleaning, disinfection, and sterilization

. . . . 34

Reprocessing methods . . . . . . . . . . . . . . . . . . 34
Reprocessing list . . . . . . . . . . . . . . . . . . . . . . . 36

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . 37

Disposal

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Disposal of medical devices . . . . . . . . . . . . . . . 38

Technical data

. . . . . . . . . . . . . . . . . . . . . . . . . 39

Product characteristics . . . . . . . . . . . . . . . . . . . 39

EMC declaration . . . . . . . . . . . . . . . . . . . . . . .  40
Data exchange and interfaces  . . . . . . . . . . . .  42
Arm lengths, swivel and lifting ranges . . . . . . .  48
Maximum load   . . . . . . . . . . . . . . . . . . . . . . . .  49
Load distribution on the Movita equipment
pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53
Load distribution on the Movita rack . . . . . . . .  54

Summary of Contents for Movita



























































Search results

Summary of Contents for Movita

Reviews:

Dräger Movita, Instructions For Use Manual, Page: 4 / 58

Search results

Summary of Contents for Movita

Reviews: