12
Change of Forming Stations K9
-1(-WAD)
Forming station assembly on shaft
Standing Seam Forming Stations
(Option)
Double Seam Forming Stations
(standard)
Cutting Rolls
(option)
Closing Stainless Steel Panels
To close a single-or-double lock seam in stainless
steel panels, for example Uginox, to achieve an
optimum closed seam, pressure adjustment rings
have to be turned for high-pressure materials. See
page 7:
pressure adjustment.
We recommend, when using seamer on site, check
seam-closure on a sample panel first.
Barrel Curved Roofs
For closing barrel curved roofs under the dimension
of 1,5 m radius insert one washer each under
forming station No. 1 and No. 1.4 (forming roll No. 4
Standing Seam). Due to the washers, it is possible
to close barrel curved roofs down to a radius of 1,2
m.
... the Roof- and Wall Program of
Pin must lock
into shaft
0.1
0.2
0.3
0.4
Take wheel
No. 1.4 out
and assemble
No. 4
0.1
0.2
1
2
0.1
0.2
0.3
0.4
1
2
1.3
1.4
Take No. 0.3 and
No. 1.3 ( 3 ) out of
seamer and
assemble No. 0.3
and No. 3
Forming rolls No.
0.4 and 1.4 (4)
must be taken out
totally
Brass Washer
1
2
Take wheel
No. 1.3 out
and assemble
No. 3
