16
Winterset K9-1-WS (option)
Before switching hot air blower on, read
the instruction sheet about the winter set.
Disconnect plug from the socket if any
maintenance is necessary to the seamer or
blower.
The hot air blower can heat up to 650° C,
1202 ° F
DANGER OF FIRE!
Keep away from inflammable articles.
Seam and hot air blower, as well as
reflector can get very hot.
Do not touch.
Danger of burns.
Wear safety gloves at all times!
Optional accessory, winter set K9-1 WS is used when
outside temperatures are low. The hot air blower will
warm up the seam to achieve an optional closed
seam.
If a temperature of +10°C on top of the seam is
not reached, turn the electronic speed control to
a lower working speed, minimum 5,5 m/min.
Assembling Winter Set to Seamer K9-1
(-WAD)
Disassemble eye screw (1)
Blower bracket (2) assemble with eye screw (1)
and tighten.
Tighten worm screw (3)
Push reflector (6) from the bottom towards the
blower and tighten screw.
Feed hot air blower (4) from the top into the
bracket (2) and tighten 3 screws (5) equal,
finger tight.
The hot air blower winter set can be electronic
regulated up to + 650° C, 1202 ° F.
For technical data, Winter Set K9-1-WS see
instruction sheet hot air blower.
... the Roof- and Wall Program of
