DR PILOT 2, Safety & Operating Instructions Manual

Page: 28 / 28

DR Power Equipment
7 5 M E I G S R O A D , P . O . B O X 2 5 , V E R G E N N E S , V E R M O N T 0 5 4 9 1
©2017 Country Home Products, Inc. All rights reserved 256071C
Daily Checklist for the DR PILOT 2 Cycle Tiller/Cultivator
To help maintain your DR PILOT 2 Cycle Tiller/Cultivator for optimum performance, we recommend you
follow this checklist each time you use your machine.
When performing any maintenance, you must first shut off the Engine; wait five (5) minutes to allow parts to cool and
disconnect the Spark Plug wire, keeping it away from the Spark Plug.
[ ] FUEL: Fill the Fuel Tank with a fresh unleaded gasoline/2-cycle oil mixture. See page 10.
[ ] ENGINE: It is very important to keep the Engine clean. Remove dirt and other debris from the
Engine Cooling Fins. A dirty Engine retains heat and can cause damage to internal
Engine components.
[ ] HARDWARE: Check all nuts and bolts to be sure that the components are secure.
[ ] FRAME: Check all welds to be sure that the Frame is intact and secure.
[ ] TINES: Make sure that the Tine Assemblies and Hood are free of accumulated debris.