background image

 

2

 

        

DR

® 

PILOT 2 Cycle Tiller/Cultivator

 

This indicates a hazardous situation, which, if not avoided, 

could

 result in death or serious injury. 

Table of Contents 

Chapter 1:  Important Safety Considerations

 ........................................................................................................ 3

 

Chapter 2:  Setting up your DR PILOT 2 Cycle Tiller/Cultivator

 ........................................................................... 6

 

Chapter 3:  Operating Your DR PILOT 2 Cycle Tiller/Cultivator

 ......................................................................... 11

 

Chapter 4:  Maintaining the DR PILOT 2 Cycle Tiller/Cultivator

 ........................................................................ 14

 

Chapter 5:

  

Troubleshooting

 ................................................................................................................................. 18

 

Chapter 6:  Parts Lists and Schematic Diagrams

 ................................................................................................ 20

 

Conventions used in this manual 

 

Tip:

  This is a helpful hint to guide you in getting the most out of your DR PILOT 2 Cycle Tiller/Cultivator. 

 

Tools Needed:

  This indicates you will need a special tool to perform a maintenance function on your Tiller/Cultivator. 

 

NOTE:

  

This information may be helpful to you.

 

 

We have done our utmost to ensure that your DR PILOT 2 Cycle Tiller/Cultivator will be one of the most trouble-free and 
satisfying pieces of equipment you have ever owned.  Please let us know of any questions you may have.  We want to answer 
them as quickly as possible.  When you do call, please have your order number, or serial number handy.  

For technical 

assistance, please visit our website at www.DRpower.com or call Toll-Free 1-800-DR-OWNER (376-9637) and one of our 
Technical Support Representatives will be happy to help you.

  We also hope to hear from you on how much you like your new 

helper.

 

If you are ever unsure about an action you are about to take, don’t do it, visit our website at www.DRpower.com for help or 
information. 

DR Power Equipment reserves the right to discontinue, change, and improve its products at any time without notice or 
obligation to the purchaser.  The descriptions and specifications contained in this manual were in effect at printing.  
Equipment described within this manual may be optional.  Some illustrations may not be applicable to your machine.

 

 

This indicates a hazardous situation, which, if not avoided, 

could

 result in minor or moderate injury. 

This information is important in the proper use of your machine.  Failure to follow this instruction could result in 
damage to your machine or property. 

Summary of Contents for PILOT 2





























Reviews: