Mach M5
Dr. Mach
Lamps and Engineering
•
The
filter disk 3
is held by six
retaining angles
4
, the retaining angles are fixed with six re-
cessed head screws.
•
Loosen the screws at three adjacent
retaining
angles 4
and turn these angles as shown in the
left drawing.
•
Lift the
filter disk 3
carefully and pull it off the
other three retaining angles.
•
Mount the new filter disk in reverse order.
ATTENTION: Only use filter disks that have
been cleaned properly
(see chapter 3.2)
.
•
Mount the
optic ring 2
in reverse order (anti-
clockwise rotation).
For mounting position the
optic ring 2
, so the
toothed wheel segment 5
of the ring and the
toothed wheel 6
in the lower housing part
work into each other.
•
Fix the optic ring by turning the
screw 1
clock-
wise.
4
3
4
3
1
5
2
6
59270001
Edition 06
28.09.2004 / Bak page 16/26
