Dr. Bridge KHG, User Manual

Page: 10 / 20

Last KH: n.nn
This is the last dKH value obtained by the KHG.
pH: n.nn
This is the last pH value obtained by the KHG.
CKI = nn
This is the testing interval (unit: minutes). Testing Interval
can be changed in the KHG system setup.
KS De-Gas
Press to purge gas from the feeder tube of KH reagent solution. Please look into the observation window to
check if KH reagent solution are flowing into the reaction chamber. After seeing reagent solution is flowing
and the LED is blinking steadily, please press the “RESET” button to stop.
ENG Mode ON
Advanced function only. Do not use unless being instructed by a qualified KHG support staff.
ENG Mode OFF
Advanced function only. Do not use unless being instructed by a qualified KHG support staff.
Test KH doser
Press to test if the Sodium Bicarbonate solution is pumping.
Test accelerator
Press to test if the reaction chamber agitator is functioning normally.
RESET
Press to reset warning signals. Also used to stop KS De-Gas function.
Refresh
Press to refresh your browser display on your computer or mobile devices.
Display Record
Press to display the log.
Reboot
Press to force reboot of the KHG.
System Setup
Press to enter into system setup screen.
Definition of the data shown on the bottom of the main control page (Figure 10):
Page 6
5.
6.
7.
8.
9.
10.
11.
12.
13.
•
•
•
(Figure 10)
User Manual
4.