6
LAN Connection
4.2
To connect the Building Access Controller 32 to LAN, insert a standard RJ45 Ethernet cable into the
10/100BaseT Ethernet port. If the LAN connection is OK, the LNK LED will light
SOLID GREEN
.
Proxy Card Reader Connection
4.3
The Building Access Controller 32 uses RJ45 to open-end cables to connect to your door sensors,
proxy card readers, and door controller. Below is a topology drawing with pinouts used when connecting
these devices.
Pin
Signal
1
NO/NC*
2
CO
3
DAT-0
4
GND
5
GND
6
DAT-1
7
ALM
8
RTN
*see "Adjusting Relay Operation"
Open-end