14
Quick Start: How to Setup BACTL 32 in T/Mon
7
In order for the Building Access Controller 32 to communicate with a T/Mon master station, it must be added to
the T/Mon database.
To define the NetGuardian for BAS, go to the Master menu > Files Maintenance menu > LAN-Based Remotes
option. The Net Guardian Definition screen will appear. Fill in the fields with the appropriate information, and be
sure to select BAC (Building Access Controller) in the Expansions Modules list box menu.
Field
Description
Site Number
3-digit site number. This number is unique over the entire alarm network. This
number is the address field for responders, derived alarms, and labeled controls.
Description
41 character description of the site.
Site Name
15 character site name. This will be stamped on every event from this BACTL.
Password
20 character password. (Only needed if T/MonXM will be managing the proxy
ports.)
Device Type
Indicates that the device is a BACTL.
Base Proxy Port
Set to 3000 (default) or the same as the BACTL.
Expansion Units
Enter the number of NetGuardian expansion units you are using. (Only needed if
T/MonXM will be managing the proxy ports.)
Expansion Modules
Select BAC.
IP Address / Port
Enter the IP address for the unit. This is the address that T/Mon will use to poll
the BACTL. Also enter the UDP Port address of the BACTL (must match the
BACTL).
Dedicated Port
If the BACTL reports on a dedicated or Ethernet line (DCP), enter the T/MonXM
port number.
Base Address
The DCP address of the “BAC1” section of a BACTL32.
