22
Filter IPA
9.6
CAUTION: Changing IPA Filter settings may make the BACTL 32 unit unreachable via LAN. Please
take caution and only enable the IPA table after submitting and verifying your other Filter IPA settings.
The Filter IPA table allows you to increase the device's network security by allowing or blocking packets
from specified IP addresses. It is primarily used for diagnostic purposes and should not be required
unless to increase security.
Addresses which appear in the table will be processed by the Building Access Controller 32. Defined IP
addresses associated with network cameras or the network time server are automatically processed
and will not be filtered out by this feature. Broadcast packets of 255.255.255.255 and ARP requests for
the Building Access Controller 32 IP address are also not filtered.
The Edit > Filter IPA menu
1. From the
Edit
menu select
Filter IPA
.
2. A warning prompt will appear. Click
OK
to continue, or
Exit
to cancel.
