Doyon FC18, Manual

Page: 34 / 60

A-31
TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
ANSWERS TO MOST FREQUENT QUESTIONS
Questions Solutions
The oven is "ON", but does not function. ¾ Check the main breaker (the one on the building
panel) and also the breaker located at the front of
the oven (5 amps).
¾ On FC18 oven, check if the emergency stop
switch located at the front of the oven is pulled
out.
The fan runs but the oven does not heat. ¾ Check if the thermostat is adjusted high enough
to fire the oven.
¾ Check the power on the heating contactor.
The oven heat too much or does not
produce enough heat. ¾ Measure the temperature with an oven
thermometer and compare it with the temperature
indicated on the thermostat.
The conveyor chain is not tight enough. ¾ To tighten:Take off the protector at the end of the
speed control located on the sides of the
conveyor. With a 7/16" key, lightly unscrew the
2 screws having an adjustment on each side;
¾
Tighten the belt of the conveyor and the screws;
¾ Put back the protectors.
The conveyor does not turn. ¾ Check the 0.75 amps breaker on the front for
FC2 or on the side for FC18 of the oven.
¾ If the breaker is "tripped", check if the conveyor
is free from any obstructions before resetting the
breaker.
¾ Check the conveyor main shaft if the security
clutch is not slipping.
If the OVERHEAT WARNING light is on,
and you hear the warning buzzer. ¾ Check if the cooling fan airflow is not
obstruscted. Check the cooling fan if it is
running. If the malfunction light goes on , or if
the audible sound , appliance is malfunctioning.
¾ Turn off or disconnect appliance from power
supply and have serviced by a electrician.