Doyon FC18, Manual

Page: 10 / 60

A-7
INSTALLATION
IN GENERAL
Take off the packaging material with care. Take off all the material used for packing and accessories.
If the equipment is delivered with casters, always lock the wheels after installation and use flexible
wire. It must also be installed with restraining device (chain comes with the oven) to guard against
transmission of strain to the gas supply and connectors.
1. To the electrician
Electrical supply installation must be in accordance with the electrical rating on the nameplate.
A disconnect switch must be installed close to the ovens to cut off the electrical supply of the oven at
anytime.
•
Check if the rotation of the motor is in accordance with the arrow on top of each unit.
If NOT
If the power supply is 3 phases and the unit is not connected in the right phase sequence,
the fan motor will turn the wrong way. This will affect the baking quality. Turn the
power "OFF" and change the phase sequence.
WARNING
The electrician must make sure that the supply cable does not come in contact
with the oven top which becomes hot.