ATTENTION
1. Please read the notice below before operating the product.
① Check the connection of all cords and correct operation when powering-on.
② Check if the ground connection is safe.
③ Make sure to check any contact part to patient.
④ Check the voltage.
⑤ Check the sterile condition of any autoclavable parts.
2. Please read the notice below during the product use.
① Constantly check the status of the product and patient during surgery.
② When product or patient has any problem, stop the operation for the patient’s safety and take the proper action.
③ Do not let patient approach or touch the product.
3. Please read the notice below after operating the product.
① Do not put any physical pressure on the all cords.
4. When the products are not being used for a long period, please be advised to the followings.
① Clean out the irrigation areas.
② Turn off the power and unplug the cord. Check the cord regularly and replaceit if it becomes damaged.
③ Clean and sterilize.
PRODUCT SPECIFICATION
1. Control Box
2. Piezo Handpiece
3. Foot Controller
Model Name
Frequency of
piezo operation
PEZ10LN
27 ± 3KHz
Model Name
Classification according to the degree
of protection against ingress of water
(IEC 60529)
FUS10
IPX8
Model Name
Rated voltage
Fuse
Rated Frequency
Power Consumption
Output of
piezo operation
Max. Irrigation Volume
PIEZOART
AC 100-120 V
5 A
50
/ 60 Hz
48 VA
15~59 VA
Max. 110㎖/min ± 20%
16
Summary of Contents for PIEZOART
Page 1: ...USER MANUAL ...
Page 23: ...MEMO 22 ...